Hybrid optimization for multiple-impulse reconfiguration trajectories of satellite formation flying

A hybrid optimization method is developed for fuel-optimal reconfigurations of a group of satellites flying in formation. The genetic algorithm performs a global search to find two-impulse trajectories, and primer vector analysis finds multiple-impulsive local optimal trajectories with the two-impulse trajectories as initial guesses. Hybrid optimization finds globally optimal trajectories for formation reconfigurations, including formation resizing, reassignment and reorientation maneuvers. Multiple-impulse trajectories reduce the fuel consumption from the two-impulse trajectories by up to 4.4% for those maneuvers. In real missions, satellites can follow two-impulse trajectories to gain the advantage of a smaller number of impulses, with the cost of slightly more propellant. The qualitative characteristics of the optimal trajectories are analyzed from the number of optimal trajectories found by hybrid optimization.     

Use of the ASTER satellite images for evaluation of structural changes in the Popocatépetl volcano related to microseismicity

Mexico is one of the most volcanically active regions in North America. Volcanic activity in central Mexico is associated with the subduction of the Cocos and Rivera plates beneath the North American plate. Periods of enhanced microseismic activity, associated with the volcanic activity of the Popocatépetl volcano are compared with periods, during which the microseismic activity was low. We detected systematical changes in the number of lineaments, associated with the microseismic activity due to lineament analysis of a temporal sequence of high resolution satellite images of the Popocatépetl volcano, provided by the ASTER/VNIR instrument. The Lineament Extraction and Stripes Statistic Analysis (LESSA) software package was used for the lineament extraction. In the future it would allow develop a methodology for detection of possible elevation of pressure in volcano edifice.     

DPOD2005: An extension of ITRF2005 for Precise Orbit Determination

For Precise Orbit Determination of altimetry missions, we have computed a data set of DORIS station coordinates defined for specific time intervals called DPOD2005. This terrestrial reference set is an extension of ITRF2005. However, it includes all new DORIS stations and is more reliable, as we disregard stations with large velocity formal errors as they could contaminate POD computations in the near future. About 1/4 of the station coordinates need to be defined as they do not appear in the original ITRF2005 realization. These results were verified with available DORIS and GPS results, as the integrity of DPOD2005 is almost as critical as its accuracy. Besides station coordinates and velocities, we also provide additional information such as periods for which DORIS data should be disregarded for specific DORIS stations, and epochs of coordinate and velocity discontinuities (related to either geophysical events, equipment problem or human intervention). The DPOD model was tested for orbit determination for TOPEX/Poseidon (T/P), Jason-1 and Jason-2. Test results show DPOD2005 offers improvement over the original ITRF2005, improvement that rapidly and significantly increases after 2005. Improvement is also significant for the early T/P cycles indicating improved station velocities in the DPOD2005 model and a more complete station set. Following 2005 the radial accuracy and centering of the ITRF2005-original orbits rapidly degrades due to station loss.     

连续推力机动轨道优化设计的贝塞尔曲线法

提出一种基于贝塞尔曲线的平面机动轨道设计方法。该方法将贝塞尔曲线方程与轨道形状方程相结合，利用得到的复合函数作为轨道方程来对机动轨道进行数学描述；通过约束条件获得可行的机动轨道族，由控制点设计给出具体的优化变量，将累积速度增量作为优化指标函数；并利用优化算法完成参数优化，从而得到最优机动轨道。最后针对设计的机动轨道推力峰值较大的问题，进一步提出了分段贝塞尔曲线法，在降低推力峰值的同时，可进一步降低燃料消耗，并在平面机动转移轨道设计的基础上，通过梯度下降对自由控制点进行修正，解决了考虑时间约束的平面轨道交会问题。     

基于实测星载原子钟数据的脉冲星守时方法

利用脉冲星估计星载原子钟钟差是实现卫星自主守时的途径之一。为充分分析基于脉冲星的自主守时系统性能，利用实测的星载原子钟钟差数据和中子星内部组成探测器(neutron star interior composition explorer, NICER)的PSR B1937+21脉冲星的观测数据，对比分析了星载原子钟和脉冲星的误差特性。设计了脉冲星守时系统框架和星载原子钟钟差估计方法。以实测的星载原子钟钟差数据为基础，计算分析了脉冲星守时系统的性能。计算结果表明，若脉冲星的脉冲到达时间（time of arrival, TOA）解算精度为1 μs/30 d，则原子钟钟差估计精度可达到优于1 μs的水平，初步验证了脉冲星守时系统的可行性。     

频谱分析法在静止气象卫星调焦分析中应用研究

利用频谱分析方法，对静止气象卫星扫描辐射计的在轨调焦进行快速、准确的分析判断，确定是否需要调整及调整时所发遥控命令的调整方向和步长等，避免了单向调出焦距极限位置时，对辐射计造成永久性损坏。文章首次提出的二维频谱法，即使在图像定位精度不高的情况下仍然适用，可以得出准确的分析结果。     

圆轨道星座全球覆盖的充分必要条件

对采用圆轨道的星座，目前的研究基本上局限于实际应用方面，很少进行理论方面的研究，本文首次提出并证明了达到全球连续多重覆盖的充要条件。这对进行星座设计具有积极的指导意义。     

Evolution of the orbital elements for objects with high area-to-mass ratios in geostationary transfer orbits

A new population of uncatalogued objects in geosynchronous Earth orbits (GEO), with a mean motion of about 1 rev/day and eccentricities up to 0.6, has been identified recently. The first observations of this new type of objects were acquired in the framework of the European Space Agency’s (ESA) search for space debris in GEO and the geostationary transfer orbit (GTO) using the ESA 1-m telescope on Tenerife. Earlier studies have postulated that the perturbations due to the solar radiation pressure can lead to such large eccentricities for GEO objects with a high area-to-mass ratio (A/M). The simulations showed that the eccentricities of GEO objects with large A/M exhibit periodic variations with periods of about one year and amplitudes depending on the value of A/M. The findings of these studies could be confirmed by observations from the ESA 1-m telescope on Tenerife.     

空间非合作目标未知构型重建质量评估方法

针对基于线阵激光雷达扫描重建获得的三维模型,因其构型未知,无法通过模型对比进行质量评估,本文着重研究未知构型的质量评估方法。首先,采用3σ优化的最小二乘法对空间非合作目标点云平面与直线进行拟合;其次,从点云密度、重建几何性质、表面完整度进行重建质量评估,再基于上述三种评估方法建立多因素综合评估数学模型,对三维重建结果进行满意度质量评估;最后通过仿真实验验证评估方法,获得多因素综合评估满意度为95.5889%,实验结果表明该评估方法合理且具有参考价值。该研究不仅能验证基于线阵激光雷达三维重建结果的精度,还为空间非合作目标未知构型质量评估提供一种新的研究思路。